Expert Answers about Land Rover
- Recommended Hitch Extender and Anti-Rattle Compatible with Thule EasyFold XT Bike Rack
- The Thule EasyFold XT 2 E-Bike Platform Rack # TH903202 is 8 inches from the center of the hitch pin hole to the upright bar of the carrier. My recommendation for your is to use the Hitch Extender For 2" Trailer Hitch Receiver 7" # HE06 or the 8" Curt Extender # C45791 with an Brophy Stabilizer Clamp and U-Bolt for 2" Hitch Receiver - Black Powder Coated Steel # RSCP to help reduce any sway in the adapter. You may also want to use etrailer Trailer Hitch Receiver Lock - Flush Design for...
view full answer... - 2008 Range Rover Brake Controller Recommendation
- Anytime the weight of the trailer is over half the weight of the towed vehicle it's strongly recommended you install a brake controller. In the event you need to make an emergency stop a brake controller makes a huge difference.
Since you have a 7-way installed already the easiest solution is the Curt Echo Mobile part # C51180. Basically this just plugs into an active 7-way and once synced to your smart phone is ready to tow. No lengthy install or complicated wiring at all! I attached...
view full answer... - Does Yakima Hangout 2 Bike Rack Fit 2015 Land Rover Evoque
- I checked with Yakima and the HangOut 2 bike rack part # Y02637 that you referenced is for sure a confirmed fit for your 2015 Land Rover Evoque. They test fit it and found it worked well so you can be confident it will work great. It might look similar to what you tried already but it is different enough to fit without hurting the spoiler.
view full answer... - Recommended Trailer Hitch And Trailer Wiring For 2008 Land Rover LR2
- The Curt Trailer Hitch Receiver, part # C13052 is a verified as a good fit for your 2008 Land Rover.
This is a Class lll hitch and it has a 2 inch receiver opening.
The Euro ball mounts we offer are not designed for a 2 inch receiver. They fit 1-1/4 inch receiver openings.
You might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball,...
view full answer... - Why Do Swinging Bike Racks All Swing Towards Passenger Side
- The reason bike racks all swing to the driver side is because when people pull over on the side of the highway they almost always pull to the right side. So if you were on the side of the highway and needed to swing the bike rack out you wouldn't want to swing it out into traffic. That's why the bike rack manufacturers like Yakima make their pivots like the part # Y02483 swing to the passenger side.
view full answer... - Does Yakima Backswing Cut Capacity of Trailer Hitch
- The Yakima BackSwing part # Y02483 that you referenced is a form of hitch extender as there isn't a way to add the pivot function without also adding length. This does add 14 inches as an extender and also does cut tongue weight capacity of the hitch by 50 percent due to added length. I don't know exactly how long of an extender you'd need but I would pretty safely assume that the 14 inches that this provides would easily be more than enough.
view full answer... - Recommended Trailer Wheel With 3.19 Diameter Hub Bore
- I have another option for you, but we do not have a 10" diameter wheel that has the 5 on 4-1/2" bolt pattern and a pilot hole of 3.19". The two 10" wheels that we offer with the 5 on 4-1/2" bolt pattern both have a 2.80" diameter pilot hole, and a 3.19" diameter hub bore is not standard with this size wheel.
As long as the center of your hub is 2.80" or smaller you would have no issue using the Steel Trailer Wheel - 10" x 6" Rim - 5 on 4-1/2 - White # AM20046, as trailer wheels center...
view full answer... - 2015 Land Rover LR4 Trailer Icon Disappearing When Towing Trailer with LED Lights
- It sounds like the 7-way on your 2015 Land Rover LR4 is not getting the signal that the trailer is connected at times, which you are correct, is due to the LED lights on your trailer, and the fact that they have such little power draw. That means the 7-way is not "recognizing" the trailer connection when you are in reverse or signaling. The 7-Way Trailer Adapter for Towing Trailers with LED Lights # C57003 was a good idea, but if that did not work the next option I suggest is to add LED...
view full answer... - Would the Trailer Connector Adapter for Land Rover fit a 2004 Land Rover Discovery
- As long as the 7-way you have installed on your 2004 Land Rover Discovery has combined turn signal functions (blinker and stop on the same circuit) then yes the # 118710 would be the correct product that you would need.Trailer Connector Adapter for Land Rover
view full answer... - Which Wheel of a 2006 Land Rover LR3 Should have Tire Chains Installed
- For an all wheel drive vehicle like your 2006 Land Rover LR3 you will want to put tire chains (if only using one set) on the main drive wheels. Which in your case would be the rear axle.
Ideally you would want to put the chains on all four wheels for max traction, but for one axle the main one is the one to be used.
For both tire sizes we have for your vehicle (255/55-19 and 255/60-18) the Easy Fit Thule Chains part # TH04115265 that you referenced have been confirmed as a fit. You'll...
view full answer... - Trailer Hitch Recommendation for 2016 Land Rover Discovery Sport
- For your 2016 Land Rover Discover Sport we offer the Curt hitch part # C13396 as a confirmed fit. This hitch would work great for you as long as you stay under the towing capacities of your vehicle and the hitch. This hitch has a 750 lb tongue weight rating and a 5000 lb total trailer weight rating.
You will need to stay under the vehicle's tow ratings as well. Basically whichever set of numbers is lower will be your overall towing capacity.
For trailer wiring you would want the part...
view full answer... - Trailer Hitch and Wiring Fit for a 2018 Land Rover Range Rover Sport
- We carry two trailer hitch receivers that fit your 2018 Land Rover Range Rover Sport; the Draw-Tite # 75229 and the Curt # C13243. Between the two I recommend the Draw-Tite because Curt requires a strap to be used if you're ever using the hitch for a bike rack or cargo carrier. Since you're going to be towing this may not matter to you. In which case it's pretty much a toss up because both hitches are very similar and both high quality. I've linked the install details to both of them...
view full answer... - Brake Controller Install Harness Recommendation for 2012 Land Rover LR4
- The correct brake controller install harness for a 2012 Land Rover LR4 is the part # 3035-P. This would be all that you need to install the Prodigy P2 part # 90885 you referenced.
view full answer... - How To Fix Trailer Lights Hyper-Flashing
- It's not common for hyper-flash to occur on a trailer but this comes down to which trailer wiring harness is installed on the tow vehicle. If you are tied into the vehicles tail light circuits as opposed to a tow package port then hyper-flash is possible on the trailer. In order to fix this you can indeed use a set of resistors, the LED Light Bulb Load-Resistor Kit part # DI34ZR.
view full answer... - Recommended Electric Fireplace with Blower Fan
- The 26" Greystone Electric Fireplace with Remote Control # 324-000065 does force the air out utilizing a blower fan. It works like a space heater with the different temperature settings, a timer, and automatic setting as well. I've attached a picture of the blower fan for reference. The blower fan doesn't have different settings like low, med, high on any of the units. It is temperature regulated.
I've linked the page to all your options and they will all have the blower fan similar...
view full answer... - Trailer Hitch and Wiring Recommendation for 2020 Land Rover Sport Towing Flagstaff E-Pro
- You've come to the right place; we've got all the high quality parts your 2020 Land Rover Sport needs to be able to tow you Forest River travel trailer at a fraction of the cost you mentioned.
My recommendation for a trailer hitch is the Curt Trailer Hitch Receiver # C13243 because of its simple installation and overall attractive appearance. It also features a superior finish, which is co-cured in a rust-resistant liquid Bonderite coating, both inside and out, and it's made in the USA....
view full answer... - Roof Rack Recommendation for 2019 Land Rover Range Rover
- For your 2019 Land Rover Range Rover with a naked roof there is only one option available and that is the SeaSucker roof rack part # 298-SX6000B which uses vacuum cups to attach to the roof of your vehicle. This rack design is very strong, requires no permanent modifications to your vehicle, and also is easily transferable to future vehicles so it really is a great option. I attached a picture of what it looks like installed as well as a review video on a similar Range Rover for more info...
view full answer... - Bike Rack and Trailer Hitch Receiver For a 2017 Land Rover Discovery Sport Carrying Up To 4 Bikes
- The Curt Trailer Hitch Receiver # C13396 is confirmed to fit your 2017 Land Rover Discovery Sport unless you have 3rd row seating. This 2" class III receiver has a maximum tongue weight for 675lbs and towing capacity of 4,500lbs. Be sure to verify your capacities with your Land Rover dealer.
I recommend the Thule Hitching Post Pro # TH934XTR for being able to carry up to 4 bikes up to 35lbs each, with your Land Rover. It has 3 mounting points to eliminate the bikes from moving front to...
view full answer... - Cargo Carrier Recommendation for a 2010 Land Rover Range Rover
- The etrailer Hitch Cargo Carrier part # e98874 is a great cargo carrier that just happens to have a great price. It's our most popular cargo carrier because of that. I would recommend it for you highly and I know it will work well for you.
I attached a review video for you to check out for more info as well.
view full answer... - Roof Rack for 2017 Land Rover Range Rover
- The Rhino-Rack ROC25 Roof Rack # RR94XR is a compatible roof rack for the 2017 Land Rover Range Rover SPORT but not your vehicle if it's the larger non-sport version. Ever since the Land Rover Range Rover entered its fourth generation in 2012, its new design made it that most brands couldn't make custom fit roof racks for it. Most roof racks are made for the Range Rover Sport line instead.
The best option for a roof rack is to use the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. It is...
view full answer...
Go To Results